NEC DT730G (CG): ITL-12CG-3 User Manual page 73

1.
Note:
The default password is 0000. When changing the
password for the first time, enter 0000 as the old
password.
STEP 5:
Enter the new password.
After entering the new password, press
Set.
[Change Password]
Old Pass
****
New Pass
Retry Pass
Set
BK
STEP 6:
Enter the new password again.
After entering the retry password, press
OK.
[Change Password]
Old Pass
****
New Pass
****
Retry Pass
BK
Set
Note:
A maximum of 32 digits (0-9, * and #) can be used when
setting a new password.
or
1
Cancel
OK
1
OK
Cancel
STEP 7:
When the password entry completes
successfully, the display changes as
follows.
Press
[Password]
Complete
When the password entry ends in failure, the following
TIP
error message is issued. In that case, press OK and
or
make a retry.
[Password]
Password Error
65
or OK.
OK
OK