Last Number Redial; Speed Dialing – Station/Group - NEC DT730G (CG): ITL-12CG-3 User Manual

1.
One-Touch Speed Calling key for feature access:
One-Touch Speed Calling key may be used as a
feature key by storing the feature access code. The
features may be programmed on a system basis by the
TIP
Telephony Server Administrator.
Access codes may be stored in conjunction with
telephone numbers. For example, one button can be
programmed by the user to transfer to a certain
extension.
Speed Dialing – Station/Group
• To Set
STEP 1: Speaker
Press
lamp lights red.
STEP 2:
Dial the system or group storage code.
Set Sys
For the assignment of Speed Calling - Station/Group
TIP
Access Code, contact the PBX maintenance personnel.
STEP 3:
Dial the desired speed dial bin. In this
example, "001" is dialed as the desired
speed dial bin.
SYS 0001
Speaker
. Receive Dial Tone.
STEP 4:
Dial the destination telephone number.
SYS 0001
STEP 5:
Press Hold.
STEP 6:
Enter a name associated with the Speed
Dial Number.
STEP 7:
Press Hold again.
STEP 8:
Press the
• To Make a Call
STEP 1:
Press
STEP 2:
Press the desired speed calling number.
STEP 3:
Lift the handset.

Last Number Redial

• To Redial Last Number Dialed
STEP 1:
Press
displayed.
LNR[ * ]/SPD[_ _]
MIC
STEP 2:
Press the Volume
until a desired number is displayed. Up to 4
previously dialed numbers are available.
93
2145551212
Speaker
key to hang up.
.
(Redial)
Speaker lamp goes off.
. The last number dialed is
(Redial)
–1
XXXXXX
PICK FDA >>>
Number to
be Redialed
(Up) or (Down) key