NEC DT730G (CG): ITL-12CG-3 User Manual page 75

1.
STEP 4: 1
Ensure USB Memory is specified.
Select an item by one of the following operations.
• Highlight an item by using, press
1
• Press .
[Peripherals]
1 USB Memory
STEP 5:
1
Ensure Remove is specified.
Select an item by one of the following operations.
• Highlight an item by using, press
1
• Press .
[USB Memory]
1 Remove
, or OK.
1/1
Back OK
, or OK.
1/1
Back OK
STEP 6:
Press
[Remove]
Are you sure?
STEP 7:
When Remove complete! is displayed,
Press
device from the terminal.
[Remove]
Remove complete!
Note:
If the USB device is not removed successfully, Remove
failure! appears. Press
procedure from
67
or OK.
Back OK
or OK, and remove the USB
OK
or OK, and restart the
STEP 6 above.