Operation; Switching On And Off - Leica Racer 100 User Manual

A reset returns the following values to their factory
EN
settings:
D
• Reference (rear)
F • Display illumination (ON)
• Beep (ON)
I
• Unit (m(mm))
E • Stack and memory are erased
All customised settings and stored values are
P
also lost.
NL
DK

Operation

S

Switching on and off

N
Switches on the instrument and laser. The
FIN
display shows the battery symbol until the
next button is pressed.
J
Pressing this button for longer switches the
instrument off.
CN
The instrument switches off automatically
ROK
after six minutes of inactivity.
PL
H
RUS
CZ
Operation
CLEAR button
The last action is cancelled. While making area or
volume measurements, each single measurement can
be deleted and remeasured in series.
Display / keypad illumination
The instrument has a sensor that automatically
switches the display and keypad illumination on or off
in response to lighting conditions.
Reference setting
The default reference setting is from the rear of the
instrument.
Press this button to take the next measurement
from the front edge
ever the reference setting is changed.
After a measurement the reference returns automat-
ically to the default setting (rear reference). See
figure {H}.
Press this button for longer the front reference
is set permanently.
Press this button, the rear reference is set again.
8
. A special beep sounds when-
Leica Racer 100 784117 en