Menu Functions - Leica Racer 100 User Manual

EN
Display
D See figure {F}
1 Laser active
F
2 Reference (front)
3 Reference (rear)
I
4 Reference (corner stop)
E 5 Measuring with the tripod
6 Stake out function
P
7 Single Pythagorean measurement
8 Double Pythagorean measurement
NL
9 Double (partial height) measurement
10 Illumination
DK
11 Save constant value, call up constant value
12 Historical memory, call up values
S
13 Battery status
14 Timer
N
15 Area/volume
FIN 16 Tilt
17 Horizontal distance measurement using tilt
J
18 Room corner angle function
19 Menu
CN
20 Continuous laser
21 Reset
ROK
22 Reference (tripod)
23 Beep
PL
24 Circumference
25 Wall area
H
26 Ceiling area
RUS 27 Intermediate line 1
28 Intermediate line 2
CZ
29 Intermediate line 3
30 Summary line

Menu functions

Menu functions
Settings
The menu allows settings to be altered and perma-
nently stored. After switching off the device or
replacing the batteries the settings are stored.
Navigation in the menu
The menu allows settings to be made at the user
level. The instrument can be specifically configured to
your personal requirements.
General description
button (pressed long) brings up the
set units and the
button (pressed short) pages through each
menu item. See figure {G}.
or button to make changes in menu items.
button (pressed short) brings up the next menu
item.
A long press on the
the new settings made in the submenu items .
Pressing the button for longer in the menu
allows you to quit the settings function without
saving.
6
MENU
, the
symbol are displayed.
button in the menu confirms
Leica Racer 100 784117 en