Audiovox FLO TV Installation Manual page 29

Troubleshooting Guide (Cont)
Problem
Poor or No Audio
Poor or No Video
Root Cause
RCA Audio Wires are not
connected
RCA Video Wires are not
connected
RCA Video Wires are not
connected
FLO TV Output not selected
Vehicle's Rear Seat
Entertainment System Video
Input not selected
- 29 -
Solution
Verify that the RCA Audio wires are properly
connected to the Audio Inputs on the vehicle's
rear seat entertainment system.
Verify that the RCA Video wire is properly
connected to the main harness Video Output.
Verify that the RCA Video wire is properly
connected to the Video Input on the vehicle's rear
seat entertainment system.
Press the MODE button on the wired or wireless
remote control to provide FLO TV to the vehicle's
rear seat entertainment system.
Change the source inputs on the vehicle's rear
seat entertainment system until the FLO TV signal
is displayed.