Audiovox FLO TV Installation Manual page 25

3. Route the RCA Male to Male Harness from the FLO TV Module installation location to the
Audio Video Input location of the aftermarket VES.
4. Connect the other end of the RCA Male to Male Harness to the Audio and Video Inputs of
the aftermarket VES.
Audio & Video Input Connectors
The main wire harness contains RCA Audio/Video Input connectors. Another A/V source can be
connected to this input. The FLO TV Module has an audio/video multiplexer (MUX) that switches the
A/V output between the
MODE button on the remote control is used to switch between FLO TV and auxiliary input.
FLO TV
service and the A/V input to allow for more system flexibility. The
- 25 -