Audiovox FLO TV Installation Manual page 22

Audio & Video Output Cable
To connect FLO TV to a Factory VES via the Factory A/V Input:
The Audio/Video Output connectors on the Main Harness provide the audio and video output from the
FLO TV Module, which must be connected to the vehicle's factory VES. Refer to Figure 1, herein, for an
overview of the wiring diagram.
1. Locate the factory VES Audio/Video Input jacks. Refer to the vehicle owner's manual for the
detailed location of the Audio/Video Input jacks. See Figure 1 for reference.
2. For a clean installation, optional right angle RCA Connectors can be used (available from
Radio Shack, Catalog Number 274-915, quantity 3 needed or similar).
3. Connect the optional right angle Audio/Video jacks to one end of the RCA Male to Male
Harness. Connect the right angle Audio/Video jacks to the factory VES A/V Input jacks. (See
Figures 9 and 10 below for examples of the FLO TV A/V Output connections to the Factory
A/V Input or Factory VES A/V Input)
- 22 -