3. Remove the plastic liner from one side of the adhesive backing on the tape pad.
4. Use the four circular cutouts, on the tape pad, for alignment to the four rubber feet on the
bottom of the FLO TV Antenna. Ensure that the tape pad is completely adhered to the bottom of
the FLO TV Antenna.
5. Starting at the strain relief on the FLO TV Antenna, attach the antenna tail to the FLO TV
Antenna. Press the antenna cable into the wire track in the antenna tail. (See Figure 5, FLO TV
Antenna Tail Installation)
Antenna Tail
Antenna Cable
Strain Relief
Figure 5 – FLO TV Antenna Tail Installation
- 15 -
FLO TV Antenna
)
(Bottom View Shown