Flo Tv Introduction - Audiovox FLO TV Installation Manual

FLO TV Introduction

Please refer to the following as an overview to use the
service:
1. Turn the vehicle ignition key to the ON position. Turn on
your Vehicle Entertainment System (VES) and select the
source input to which the
Watching the
with the engine OFF will run down the vehicle's battery.)
2. The VES screen will show the FLO TV splash screen and then
the FLO TV preview channel or the last channel that was
being viewed.
3. If you are not subscribed, subscribe to the
calling 888-99-FLOTV or
ID and Authorization Code of the FLO TV module are
required for subscription. Press the
remote to access the Settings Menu. Press the
arrow) key to highlight Subscription Information and press
the (OK) key on the remote. Your Device ID and
Authorization Code will be displayed on the VES screen.
4. Press the (up arrow) or
to change channels.
5. Press the (Guide) key on the remote to access the FLO TV
Channel Guide.
The arrow keys ( d
6.
through the Channel Guide.
7. Press the (OK) key on the remote to select a desired
channel/show from the Channel Guide.
8. Press the (Information) key on the remote to display the
program information related to the current program.
9. Press the (Settings) key on the remote to access the FLO
TV user settings menu (e.g. Parental Control, etc.).
10. The (Mode) key on the remote allows the user to switch
FLO TV
between the
one is connected.
11. Visit www.flotv.com
FLO TV
FLO TV
service for an extended period of time
on line at
(down arrow) key on the remote
) on the remote allow for navigation
service and an auxiliary A/V source if
for more info.
7
FLO TV
service is connected. (Note:
FLO TV
service by
The Device
www.flotv.com
(Settings) key on the
(down