PSA Supa8 User Manual page 5

To DISARM the panel:
On Keypad
(a)
Enter:
Followed by:
(b)
Step 8: Walk Test
To check operation of all Zones a Walk Test is recommended.
(a) On Keypad
Enter:
(b) Followed by:
The walk test function is now activated.
The Zone LED will light as each Zone is triggered and the siren will squawk momentarily. The
Zone LEDs will remain on to show which Zone has been violated. (Requires only one person
testing).
To deactivate a walk test press the
To arm and disarm the system enter Master User Code
Note:
This completes the instruction for a Local Panel
SUPA8 Quick Setup
1234
0
1234
5
*
key.
THE SYSTEM IS NOW OPERATIONAL
To arm the system enter:
To disarm the system enter:
The system can also be quick armed by pressing
To disarm enter User Code then
To change Master User Code or User Codes, please refer to Page 22
(all Zone lights will flash)
(the off key)
(all Zone lights will flash)
(to initiate a walk test)
1234
by
0
4
(factory default) followed
9
(ON)
0
(OFF)
#9