Home Mode (Using Your User Code); Home Mode (Using Quick Home) - PSA Supa8 User Manual

HOME mode (using your User Code)

The ON light should be off indicating the system is OFF.
Your installer may have installed your system so that some areas may be
monitored whilst you are still on the premises. For example, the doors and
windows may be protected at night leaving the internal detectors isolated to
allow movement inside the house.
Make sure that all protected areas are shut securely.
*
Enter
1.
____
Enter
2.
(All Zone lights will flash - waiting for a command)
8
Enter
3.
Check that the ON light starts flashing to indicate arming in Home
4.
mode.
(The exit beeper will sound continuously during exit delay. If the exit
beeper has been turned off by the installer, three beeps will be heard at
the end of exit delay.)

HOME mode (using Quick Home)

Your installer may have programmed the SUPA8 to allow abbreviated arming.
If so, turn the system ON as follows.
*
Enter
1.
#
Enter
2.
8
Enter
3.
Check that the ON light turns starts flashing to indicate arming in
4.
Home mode.
(The exit beeper will sound continuously during exit delay. If the exit
beeper has been turned off by the installer, three beeps will be heard at
the end of exit delay.)
SUPA8 User Manual
.................... To clear the keypad
.... Your User Code
.................... Arms the SUPA8 in Home mode
.................... To clear the keypad
...................
(All Zone lights will flash - waiting for a command)
.................... Arms the SUPA8 in Home mode
20