Programming Telephone Numbers - PSA Supa8 User Manual

Programming Telephone Numbers

Note: To be able to program telephone numbers the SUPA8 must be
programmed for personal dialling format.
Telephone numbers are programmed at specific addresses in the
system memory.
Addresses are:
Programming Telephone number 1
____
1.
(All Zone lights will flash - waiting for a command)
7
........................................ To enter program mode
2.
(ON-LINE lights flashing indicates program mode)
128
3.
(The existing telephone number, if any, will be displayed digit by digit)
________
4.
(If you make a mistake at this stage, press
#6
................................... Must be entered after the number
5.
*
........................................ To finish current address
6.
At this stage you can enter the address of another telephone
number by repeating steps 3 to 6 or press
Note: The maximum length of any telephone number is 15 digits.
SUPA8 User Manual
Telephone Number 1
Telephone Number 2
Temporary Telephone 112
....................... Your Master Code
.............................. Address for Telephone number 1
.... Enter the Telephone number
(Maximum 15 digits)
*
to go back to step 3)
*
24
128
144
to exit program mode.