Away Mode (Using Super Codes) - PSA Supa8 User Manual

AWAY mode (using Super Codes)

WHAT ARE SUPER CODES?
The Super Codes option allows the Master Code holder to issue user codes
with limited functions to some users of the SUPA8.
SUPER CODE OPERATION
If your installer has enabled the Super Codes option, User Codes will operate
as follows:
Master User Code and User Codes 2 to 7 operate normally (as per page 9).
Enter USER CODE then
Enter USER CODE then
Or Enter USER CODE then [any digit] for access to all allowable
functions.
User Codes 8 to 15 operate as below and can only turn the SUPA8 ON and
OFF.
Enter USER CODE to turn SUPA8 ON.
Enter USER CODE to turn SUPA8 OFF.
PURPOSE OF SUPER CODES
The Super Codes option was introduced for two reasons.
Some users prefer the option of simply entering their four digit user code to
turn ON or OFF without the requirement to enter the fifth, command digit.
If you have multiple users each with their own user code, you may not want to
allow all the users to have access to other SUPA8 functions such as Review
Memory, Isolation, Walk Test, etc. These users should be allocated a user code
from 8 to 15.
Holders of codes 8 to 15 still have access to the keypad Panic facility by
#1
pressing
SUPA8 User Manual
9
to turn SUPA8 ON.
0
to turn SUPA8 OFF.
19