How to turn the system OFF
The ON light will be on or flashing.
____
Enter
1.
(All Zone lights will flash - waiting for a command)
0
Enter
2.
Check that the ON light turns off.
3.
Isolating Zones
You are able to isolate (disable) selected Zones and turn the system ON. This
is useful in cases where, for example, a pet will be kept in a certain room or if
a detector has become faulty and must be isolated from the system.
*
Enter
1.
____
Enter
2.
(All Zone lights will flash - waiting for a command)
6
Enter
3.
lights will turn on to indicate isolation mode.
_
............................. Enter the Zone number/s you wish to
4.
isolate. The corresponding lights will turn on. Pressing the Zone
number again will turn off the isolation for that Zone.
*
Enter
5.
The system can now be turned ON as normal. Isolated Zones are
enabled again the next time you turn the SUPA8 OFF.
SUPA8 User Manual
.... Your User Code
.................... Turns OFF the SUPA8
.................... To clear the keypad
.... Your User Code
.................... The ON-LINE, LOW BAT, AC FAIL & ON
.................... To exit isolation mode
21