Electronic Operation; Hotkeys - FANATEC CSL Elite Wheel Base + Manual

7.1 Hotkeys

7.1.1 Tuning Menu
To enter the Tuning Menu, use the Tuning Menu but-
ton (usually the button with the wrench symbol or the
small black button close to the LED display of your
Fanatec steering wheel; see corresponding Quick
®
Guide of your Fanatec
(right) shows the Tuning Menu button of the CSL Elite
Steering Wheel (PS4
7.1.2 Restore original Tuning Menu settings
To restore the original Tuning Menu settings, open the Tuning Menu. S_1 will
be shown on the tuning display. Then press and hold the Tuning Menu button
for about five seconds until 'rSt' is displayed.
7.1.3 Wheel centre calibration
If a centre calibration is needed (e.g. after updating the
firmware of the CSL Elite Wheel Base+) first you need
to enter the Tuning Menu as described above.
When you use the CSL Elite Steering Wheel (PS4
version) you must press the buttons
same time.
When you use a Fanatec
ClubSport Series you must press the left and right
stick at the same time. Please see corresponding quick
guide of the Fanatec
with the CSL Elite Wheel Base+ (PS4
The picture on the right hand side just shows the
Fanatec steering wheel Porsche 918 RSR as an
®
example:
36
ELECTRICAL OPERATION
7
steering wheel). The picture
®
version) as an example:
TM
steering wheel from the
®
steering wheel you decide to use
®
TM
+ at the
version).
TM