FLIR Alpha Nir User Manual page 20

Alpha NIR User's Guide 412-0007-10 Ver 150
3.2.32. Save in the camera's folder. "Save".
3.2.33. Apply now, but don't change default settings. Push the "GO" button.
3.2.34. Look at the camera's image with lens on. If the image is good, continue if
another NUC is to be made. If there is a large area of bad pixels in the
image, try increasing VDetCom voltage and re-NUC the camera.
3.2.35. Do a NUC for each integration time. Set the integration time and VDetCom
by selecting the "Camera" and "Control Camera" options from the pull
down menu or at the "Control System Camera Directly" option on the upper
tool bar. IMPORTANT NOTE : If the NUC looks bad because it
appears that a large area of pixels are not turned on, try a higher
VDetCom voltage. Set the Camera Integration Time, skimming mode, and
VDetCom voltage to;
INTEGRATION TIME
VOLTAGE
33.2 msec
16 msec
500 usec
100 usec
25 usec
*5 usec
16 msec
33.2 msec
100 msec
200 msec
500 msec
*Note integration times shorter than 25 usec may need a brighter light
source. Also, some sensors may not image very well in high gain mode
and at long integration times (200 msec or 500 msec in high gain mode).
3.2.36. Open the "Generate New NUC and BPR tables" icon on top tool bar. Icon
has camera with arrow on it.
3.2.37. Open camera's folder.
3.2.38. Create an integration time folder and highlight the folder.
3.2.39. Push the "Select Cur Dir" button.
3.2.40. Repeat 2.11. to 2.35. for each NUC.
MINIMUM VDETCOM
lens on, f/ 1.4, skimming on
lens on, f /1.4, skimming on
no lens, skimming on
no lens, skimming on
no lens, skimming on
no lens, skimming off
lens on, f /1.4, skimming off
lens on, f /1.4, skimming off
lens on, f /1.4, skimming off
lens on, f /1.4, skimming off
lens on, f/ 1.4, skimming off
19
INDIGO OPERATIONS
Low Gain 4.70V
Low Gain 4.70V
Low Gain 4.75V
Low Gain 4.80V
Low Gain 5.0V
Low Gain 5.1V
High Gain 4.70V
High Gain 4.70V
High Gain 4.70V
High Gain 4.70V
High Gain 4.70V