Table of Contents
Advertisement
32
8.7
VALVE TRAIN REPLACEMENT
A.
Remove the glass door. See "DOOR REMOVAL AND INSTALLATION" section. Remove the burners,
see "BURNER REMOVAL" section.
B.
Remove the 14 screws holding the valve train in place.
NOTE: A new gasket may be required when reinstalling the valve train assembly. Contact your
local authorized dealer/distributor.
C.
Carefully lift the valve train assembly out far enough to access the manual shut off valve and turn to
the off position. Disconnect the fl ex connector from the valve. You may now lift the valve train out of the
appliance.
W415-1033 / A / 10.12.11
Hide quick links:
Advertisement
Table of Contents
