Hand Held Remote Operations; Temperature Display; Room Thermostat; Smart Thermostat - Napoleon XIR3N Installation And Operating Instructions Manual

6.2.3

HAND HELD REMOTE OPERATIONS

A. Press the ON/OFF key on the transmitter. The transmitter
display will show all active icons on the screen. A single
"beep" from the receiver will confi rm reception of the
command.
6.2.4

TEMPERATURE DISPLAY

A. With the system in the "OFF" position, press the
Thermostat Key and the Mode Key at the same
time to change from degrees F to C.
B. Look at the LCD screen on the Transmitter to
verify that a C or F is visible to the right of the
Room Temperature display.
6.2.5

ROOM THERMOSTAT

The remote transmitter can operate as a room thermostat.
The thermostat can be set to a desired temperature to control the
comfort level in the room.
A. Press the Thermostat Key. The LCD display on the
Transmitter will show that the room is "ON" and the set
temperature is now displayed.
B. To adjust the set temperature, press the Up/Down Arrow
Keys until the desired set temperature is displayed on the
LCD screen of the Transmitter.
6.2.6

SMART THERMOSTAT

The Smart Thermostat function adjusts the fl ame height according to the difference
between the set temperature and the actual room temperatures. As the room
temperature gets closer to the set point the Smart Function will automatically adjust
the fl ame down.
A. Press the thermostat key unit the word "SMART" appears to the right of the
temperature bulb graphic.
B. To adjust the set temperature, press the Up/Down arrow keys until the
desired set temperature is displayed on the LCD screen at the Transmitter.
BLUE LCD DISPLAY
ON/OFF KEY
THERMOSTAT KEY
UP/DOWN
ARROW KEY
MODE KEY
35.4
°F
73
35.5
ROOM TEMPERATURE
76
ON
68
SET TEMPERATURE
35.6
ON
SMART
68
MAX
35.7
21
°C
23
°F
76
°F
W415-1033 / A / 10.12.11