Homi Control Function - Denon AVP-A1HDCI Owner's Manual

.~,[.ll.
o
Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
o
When "DENON LINK" is assigned at the GUI menu "Assign" setting,
the PCM signals, network audio signals (Internet radio, media server,
USB and Rhapsody), XM signals and HD Radio signals input from the
digital input connectors cannot be output from the analog REC OUT
connectors.
o
Input sources for which "Delete" is selected at "Source Delete"
cannot be selected.
Dolby Headphone recording
When REC OUT mode is set to "SOURCE", with the AVP-A1HDCI it
is possible to output signals encoded in the Dolby Headphone mode
from the recording output terminal and record them on a separate
recorder.
HOMI Control Function
When connecting the AVP-A 1HDCI to a television or player compatible with the HDMI control function, the following operations are
possible.
o
Turn power ON/OFF (Synchronize with television)
o
Switch to sound output equipment (TV and AVP-A1HDCI)
o
Adjust volume
o
Switch input source
.#
o
When using these functions set as follows: GUI menu "Manual Setup" - "HDMI Setup" - "HDMI Control" (!2ir'page 32).
o
When using these functions do not assign the "HDMI"
to
"TV/CBL"
Connections
I
1
The Dolby Headphone play mode is set when
headphones are connected to
<PHONES>
during
playback in the STANDARD (DOLBYIDTS
Surround) mode.
When this is done, signals encoded in the Dolby Headphone
mode are automatically output from the recording output
terminals (analog and digital) and can be recorded.
2 Select the parameters and set the desired mode.
Start recording.
Refer to the" Dolby Headphone" (!2ir' page 49).
-u·n-
Do not disconnect the headphones during recording.
Player compatible
with HOMI
control function
HOMI
OUT
Television compatible with
HOMI control function
- - A U D I O - -
AUDIO OPTICAL HOM!
OUT OUT IN
l A
~G
I@]
C§)
70