Denon AVP-A1HDCI Owner's Manual page 7

I
(~·_-"':'f::=-~-"i
t..2......
2.. ..
Q J
/]
o
Display
f)
Remote control sensor·
(4)
• SOURCE SELECT knob ..··..·· ·..··.. · ..·· ..·· ·· ·.. (43)
• SOURCE button (43)
• TUNING PRESET button ..
(57)
• ZONE2/3/4/ REC SELECT button.. ·.. ·(69.83)
• VIDEO SELECT button (45)
fir
Part Names and Functions
For buttons not explained here. see the page indicated in parentheses ( ).
o
Power operation button (ON/STANDBY) · ··· ·(56)
8
Power indicator .......... ·.. ··· .. ·· ·.. · ·.. · · ·· (56)
• Power switch (.-ON .OFF) (56)
eDoor
Cit
QUICK SELECT buttons / indicators ·.. · · · (72)
o
MASTER VOLUME control knob · · · ·(56)
• Master volume indicator
-N'U-
• Replace the batteries with new ones if the set does not operate
even when the remote control unit is operated close to the unit.
• The supplied batteries are only for verifying operation.
• When inserting the batteries. be sure to do so in the proper direction.
following the "EEl" and
"e"
marks in the battery compartment.
• To prevent damage or leakage of battery fluid:
• Do not use a new battery together with an old one.
• Do not use two different types of batteries.
• Do not attempt to charge dry batteries.
• Do not short-<:ircuit. disassemble. heat or dispose of batteries in
flames.
• If the battery fluid should leak. carefully wipe the fluid off the inside
of the battery compartment and insert new batteries.
• Remove the batteries from the remote control unit if it will not be in
use for long periods.
• When replacing the batteries. have the new batteries ready and
insert them as quickly as possible.
Point the remote control unit at the remote sensor when operating it.
(RC-1067)
-Nth-
The set may function improperly or the remote control unit may not
operate if the remote control sensor is exposed to direct sunlight,
strong artificial light from an inverter type fluorescent lamp or infrared
light.
4
I
(~·_-"':'f::=-~-"i
t..2......
2.. ..
Q J
/]
o
Display
f)
Remote control sensor·
(4)
• SOURCE SELECT knob ..··..·· ·..··.. · ..·· ..·· ·· ·.. (43)
• SOURCE button (43)
• TUNING PRESET button ..
(57)
• ZONE2/3/4/ REC SELECT button.. ·.. ·(69.83)
• VIDEO SELECT button (45)
fir
Part Names and Functions
For buttons not explained here. see the page indicated in parentheses ( ).
o
Power operation button (ON/STANDBY) · ··· ·(56)
8
Power indicator .......... ·.. ··· .. ·· ·.. · ·.. · · ·· (56)
• Power switch (.-ON .OFF) (56)
eDoor
Cit
QUICK SELECT buttons / indicators ·.. · · · (72)
o
MASTER VOLUME control knob · · · ·(56)
• Master volume indicator
-N'U-
• Replace the batteries with new ones if the set does not operate
even when the remote control unit is operated close to the unit.
• The supplied batteries are only for verifying operation.
• When inserting the batteries. be sure to do so in the proper direction.
following the "EEl" and
"e"
marks in the battery compartment.
• To prevent damage or leakage of battery fluid:
• Do not use a new battery together with an old one.
• Do not use two different types of batteries.
• Do not attempt to charge dry batteries.
• Do not short-<:ircuit. disassemble. heat or dispose of batteries in
flames.
• If the battery fluid should leak. carefully wipe the fluid off the inside
of the battery compartment and insert new batteries.
• Remove the batteries from the remote control unit if it will not be in
use for long periods.
• When replacing the batteries. have the new batteries ready and
insert them as quickly as possible.
Point the remote control unit at the remote sensor when operating it.
(RC-1067)
-Nth-
The set may function improperly or the remote control unit may not
operate if the remote control sensor is exposed to direct sunlight,
strong artificial light from an inverter type fluorescent lamp or infrared
light.
4