Hue; Enhancer; Sharpness; Main Zone - Denon AVP-A1HDCI Owner's Manual

•
ZONE2/3/4
MAIN ZONE
IW
,.~
Information '
• When the input signal is 1080p the "Picture Adjust" setting will be
ineffective.
• Adjusting the "Contrast", "Brightness", "Chroma Level" and "Hue"
settings does not affect the HDMI input signal.
• "Hue" can be adjusted for composite video and S-Video signals.
• The adjustment values are stored for the individual input sources.
• "DNR", "Enhancer", and "Sharpness" are each effective with HDMI
output. However, they are ineffective with 480V576i output.
•
DNR
Sharpness
Enhancer
Delay audio.
This sets the delay time for audio signals.
[Variable range]
1;' 8 ,.,·1 -
!!!'J!!!.
• This cannot be adjusted when playing in the EXT. IN (when in analog
model. DIRECT or STEREO mode (with "Crossover Frequency" set
to "FIXED-THX-", "Front" set to "Large", "Tone Defeat" to "ON"
and "Room EQ" to "OFF").
• The adjustment range is 0 to 100 ms when the Auto Lipsync
Correction function is activated.
Operating from the main unit or the main
remote control unit
*
The GUI menu is not displayed when carrying out this setting.
CD
Press the
AUDIO DELAY
button on the main unit or
A.
DLbutton on
the main remote control unit.
@
Use the
<l
t>
button to set.
54
•
ZONE2/3/4
MAIN ZONE
IW
,.~
Information '
• When the input signal is 1080p the "Picture Adjust" setting will be
ineffective.
• Adjusting the "Contrast", "Brightness", "Chroma Level" and "Hue"
settings does not affect the HDMI input signal.
• "Hue" can be adjusted for composite video and S-Video signals.
• The adjustment values are stored for the individual input sources.
• "DNR", "Enhancer", and "Sharpness" are each effective with HDMI
output. However, they are ineffective with 480V576i output.
•
DNR
Sharpness
Enhancer
Delay audio.
This sets the delay time for audio signals.
[Variable range]
1;' 8 ,.,·1 -
!!!'J!!!.
• This cannot be adjusted when playing in the EXT. IN (when in analog
model. DIRECT or STEREO mode (with "Crossover Frequency" set
to "FIXED-THX-", "Front" set to "Large", "Tone Defeat" to "ON"
and "Room EQ" to "OFF").
• The adjustment range is 0 to 100 ms when the Auto Lipsync
Correction function is activated.
Operating from the main unit or the main
remote control unit
*
The GUI menu is not displayed when carrying out this setting.
CD
Press the
AUDIO DELAY
button on the main unit or
A.
DLbutton on
the main remote control unit.
@
Use the
<l
t>
button to set.
54