Convenient Functions; Hdmi Control Function - Denon AVP-A1HD Owner's Manual

NOTE
• Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
• When "DENON LINK" is assigned at the GUI menu "Assign" setting,
the PCM signals, network audio signals (Internet radio, media server
and USB), input from the digital input connectors cannot be output
from the analog REC OUT connectors.
• Input sources for which "Delete" is selected at "Source Delete"
cannot be selected.
Dolby Headphone recording
When REC OUT mode is set to "SOURCE" , with the AVP-A1HD it is
possible to output signals encoded in the Dolby Headphone mode
from the recording output terminal and record them on a separate
recorder.
1
The Dolby Headphone play mode is set when
<PHONES>
headphones are connected to
playback in the STANDARD (DOLBY/DTS Surround)
mode.
When this is done, signals encoded in the Dolby Headphone
mode are automatically output from the recording output
terminals (analog and digital) and can be recorded.
2
Select the parameters and set the desired mode.
Start recording.
Refer to the "Dolby Headphone" (vpage 47).
NOTE
Do not disconnect the headphones during recording.

Convenient Functions

HDMI Control Function

When connecting the AVP-A1HD to a television or player compatible with the HDMI control function, the following operations are
possible.
Turn power ON/OFF (Synchronize with television)
•
Switch to sound output equipment (TV and AVP-A1HD)
•
Adjust volume
•
Switch input source
•
• When using these functions set as follows: GUI menu "Manual Setup" – "HDMI Setup" – "HDMI Control" (vpage 31).
• When using these functions do not assign the "HDMI" to "TV/CBL" .
Connections
during
Player compatible
Television compatible with
with HDMI
HDMI control function
control function
L R
L R