Denon AVP-A1HDCI Owner's Manual page 45

•
When you purchase a new function and register your user information,
"Registerd" is displayed on this menu and you can proceed with the
upgrade.
Upon completion of the upgrade, you can start using the new
function.
~I{ffl~­
,~
• In order to use these functions, you must have the correct system
requirements and settings for a broadband Internet connection. For
details, see pages 35 - 37.
• Do not turn off the power until updating or upgrating is completed.
• Normally there is no need to use this function, aside from the cases
described below.
· Firmware Update: In the case of applying the latest firmware
updates (free)
· Add New Feature: In the case of future upgrades to add new
functions to the receiver (payment required)
· Information regarding the "Firmware Update" function and ':A.dd
New Feature" will be announced on the DENON web site each
time related plans are defined.
• Even with a broadband connection to the Internet, approximately
1 hour is required for the updating/upgrading procedure to be
completed.
Once updating/upgrading starts, normal operations on the
AVP-A1HDCI cannot be performed until updating/upgrading is
completed.
Furthermore, updating/upgrading the firmware may reset the
backup data for the parameters, etc., set for the AVP-A 1HDCI.
• When updating/upgrading the firmware, we recommend using
wired connections (Ethernet cable).
Upgrade
Execute the upgrade process.
When upgrading starts, the power indicator becomes red and the GUI
screen is shut down.
The amount of upgrade time which has elapsed is displayed during
the upgrade process.
When upgrading is complete the power indicator becomes green and
normal status is resumed.
*
If the upgrade is not successful. an error message identical to those
in "Firmware Update" will appear on the display.
Failure to log into server.
Server is busy. Wait a while then try again.
Updating failed.
Failure connecting to server.
Server is busy
Login failed
Updating failed
Connection fail
If POA-A 1HDCI is connected using the control link, POA-A1HDCI is
updated simultaneously with update of AVP-A1HDCI.
Check for Update
This function allows a DENON serviceperson or installer to check the
AVP-A1HDCl's status and make settings via the Internet.
-u·n.
Only use this function if so instructed by a DENON serviceperson or
installer.
You can check for firmware updates. You can also check approximately
how long it will take to complete an update.
Start
Execute the update process.
When updating starts, the power indicator becomes red and the GUI
screen is shut down.
The amount of update time which has elapsed is displayed during the
update process.
When updating is complete the power indicator becomes green and
normal status is resumed.
*
If the display reads as shown below, check the settings and network
environment, then update again.
C
Bright
- - Dim ~
OFF - Dark
..--J
Operating from the main unit
Press the
DIMMER
button.
[ Selectable items]
·.~lIf~
I;HlIf:.1
", -. . ,<:-.' \
:.~~
' ...."
",.:.~.
[Selectable items]
b_I.')HIl?
;~
If POA-A1HDCI is connected using the control link, POA-A1HDCI
meter operation is turned OFF when the AVP-A 1HDCI display is
turned "OFF".
• When "Setup Lock" is set to "ON", the settings listed below can
no longer be changed. Also, "SETUP LOCKED'" is displayed if you
attempt to operate related buttons.
· GUI menu operations
· RESTORER
· Night Mode
· Parameter
· Room EO
· Channel Level
· Audio Delay
• To cancel the setting, press the
MENU
button to re-display the
"Setup Lock" screen, then change the setting to "OFF".
42
•
When you purchase a new function and register your user information,
"Registerd" is displayed on this menu and you can proceed with the
upgrade.
Upon completion of the upgrade, you can start using the new
function.
~I{ffl~­
,~
• In order to use these functions, you must have the correct system
requirements and settings for a broadband Internet connection. For
details, see pages 35 - 37.
• Do not turn off the power until updating or upgrating is completed.
• Normally there is no need to use this function, aside from the cases
described below.
· Firmware Update: In the case of applying the latest firmware
updates (free)
· Add New Feature: In the case of future upgrades to add new
functions to the receiver (payment required)
· Information regarding the "Firmware Update" function and ':A.dd
New Feature" will be announced on the DENON web site each
time related plans are defined.
• Even with a broadband connection to the Internet, approximately
1 hour is required for the updating/upgrading procedure to be
completed.
Once updating/upgrading starts, normal operations on the
AVP-A1HDCI cannot be performed until updating/upgrading is
completed.
Furthermore, updating/upgrading the firmware may reset the
backup data for the parameters, etc., set for the AVP-A 1HDCI.
• When updating/upgrading the firmware, we recommend using
wired connections (Ethernet cable).
Upgrade
Execute the upgrade process.
When upgrading starts, the power indicator becomes red and the GUI
screen is shut down.
The amount of upgrade time which has elapsed is displayed during
the upgrade process.
When upgrading is complete the power indicator becomes green and
normal status is resumed.
*
If the upgrade is not successful. an error message identical to those
in "Firmware Update" will appear on the display.
Failure to log into server.
Server is busy. Wait a while then try again.
Updating failed.
Failure connecting to server.
Server is busy
Login failed
Updating failed
Connection fail
If POA-A 1HDCI is connected using the control link, POA-A1HDCI is
updated simultaneously with update of AVP-A1HDCI.
Check for Update
This function allows a DENON serviceperson or installer to check the
AVP-A1HDCl's status and make settings via the Internet.
-u·n.
Only use this function if so instructed by a DENON serviceperson or
installer.
You can check for firmware updates. You can also check approximately
how long it will take to complete an update.
Start
Execute the update process.
When updating starts, the power indicator becomes red and the GUI
screen is shut down.
The amount of update time which has elapsed is displayed during the
update process.
When updating is complete the power indicator becomes green and
normal status is resumed.
*
If the display reads as shown below, check the settings and network
environment, then update again.
C
Bright
- - Dim ~
OFF - Dark
..--J
Operating from the main unit
Press the
DIMMER
button.
[ Selectable items]
·.~lIf~
I;HlIf:.1
", -. . ,<:-.' \
:.~~
' ...."
",.:.~.
[Selectable items]
b_I.')HIl?
;~
If POA-A1HDCI is connected using the control link, POA-A1HDCI
meter operation is turned OFF when the AVP-A 1HDCI display is
turned "OFF".
• When "Setup Lock" is set to "ON", the settings listed below can
no longer be changed. Also, "SETUP LOCKED'" is displayed if you
attempt to operate related buttons.
· GUI menu operations
· RESTORER
· Night Mode
· Parameter
· Room EO
· Channel Level
· Audio Delay
• To cancel the setting, press the
MENU
button to re-display the
"Setup Lock" screen, then change the setting to "OFF".
42