Connecting Equipm.nt With Hdmi - Denon AVP-A1HDCI Owner's Manual

Av surround pre-amplifier
Hide thumbs Also See for AVP-A1HDCI:
Table of Contents

Advertisement

Operations
1
Connect AVP-AlHDCI and POA-AlHDCI with the
control link cable.
*
The control link cable is included with the POA-A 1HDC!.
*
AVP-A1HDCI can be connected and control to up to 2 POA-
A1HDCI units.
Refer to the POA-A1 HDCI user's manual for how to connect.
2
Set the POA·AIHDCI's control selector switch to
"AVP".
3
Set the POA-AIHDCI's mode select switch according
to the number of POA-AIHDCI units you are
connecting.
When connecting 1 unit :" 1"
When connecting 2 units: 1st unit" 1",2nd unit" 2"
*
Refer to the POA-A1HDCI owner's manual for details.
4
Switch the AVP-AlHDCI and POA-AIHDCI power
on.
5
Depending on the number of POA-AIHDCI units to
be connected, set GUI menu "Option Setup" - "POA
Setting" - "POA LINK" to either "ON (Single)" or
"ON (Dual)" (Gf'page 39).
6
Use GUI menu "Option Setup" - "POA Setting"
- "LINK Check" to check the connection.
Connecting Equipment with HDMI '
connectors
With HDM I connections, the video and audio signals can be transferred
with a single cable.
DVD
pi""
l
Moo""
J
HOMI
HOMI
OUT
IN
CJ
~
!
• By default, HDMI sound is output from the speaker of the power
amp connected to AVP-A1 HDC!.
• To output the sound from the TV, make the settings at GUI menu
"Manual Setup" - "HDMI Setup" - "Audio" - "TV" (Gr'page 32).
*
The AVP-A1 HDCI is supported to the feature of HDMllisted below.
• 30 and 36 bit Deep Color
• xvYCC
• Auto Lipsync Correction
Compatible audio
Details
Disc:s
fonnat
(examples)
2-channel linear PCM
2ch 32-192 kHz
CD, DVD-Video,
16/20/24 bits
DVD-Audio
Multi-channel linear
8ch 32-192 kHz
DVD-Audio
PCM
16/20/24 bits
Dolby Digital, DTS
Bitstream
DVD-Video
2/5.1 ch
DSD
28224 MHz
SACD
1 bit
Dolby Digital Plus,
HD DVD,
Dolby TrueHD,
Bitstream
DTS-HD
Blu-ray Disc
Copyright protection system (HDCP)
In order to play the digital video and audio signals of a DVD- Video or
DVD-Audio disc using HDMI/DVI connections, both the connected
DVD player and monitor must be equipped for a copyright protection
system called "HDCP" (High-bandwidth Digital Content Protection).
HDCP is a copy protection technology consisting of data encoding
and mutual identification of the devices.
The AVP-A1HDCI is HDCP-compatible. For details on the DVD player
or monitor you are using, refer to its operating instructions.
When connecting with an HDMIIDVI converter cable
(adapter)
• HDMI video signals are theoretically compatible with the DVI
format.
When connecting to a monitor, etc., equipped with a DVI-D
connector, connection is possible using an HDMI/DVI converter
cable, but depending on the combination of components in some
cases the video signals will not be output.
• When connecting using an HDMI/DVI converter adapter, the video
signals may not be output properly due to poor connections with
the connected cable, etc.
12
I

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents