Denon AVP-A1HDCI Owner's Manual page 56

Middle ~
-
r
OFF - Low
High
Operating from the main unit or main remote
control unit
During playback, press the
RESTORER
button on the main unit or the
RSTR
button on the main remote control unit.
When set to something other than "OFF",
"1lIiiIlmI"
is displayed.
L _ _
O
_
F
_
F
_ - _ _ Mode 1 - Mode 2
(RESTORER 64) (RESTORER 96)
Mode 3
(RESTORER HO)
• Such compressed audio formats as MP3, WMA (Windows Media
Audio) and MPEG-4 AAC reduce the amount of data by eliminating
signal components that are hard for the human ear to hear. The
RESTORER function generates the signals eliminated upon
compression, restoring the sound to conditions near those of the
original sound before compression. It also corrects the sense of
volume of the bass to obtain richer sound with compressed audio
signals.
• This is displayed on the GUI menu and can be set when the input
source is set to "XM'; "HD Radio" or "NET/USB'; or when analog
signals (including AM/FM signals) or PCM signals (fs = 44.1/48
kHz) are input.
iifJ
Operating from the main unit or main remote
control unit
Press the
NIGHT
button on the main unit or the
NGT
button on the
main remote control unit.
The
"lID"
indicator lights when "Low", "Middle" or "High" is
selected.
~
Operating from the main unit
Press the
DYNAMIC EO
button.
• "Audyssey", "Audyssey Byp. LJR" and "Audyssey Flat" can be
selected after the auto setup procedure has been performed.
• If the settings of the speakers for which" None" has been determined
at "Auto Setup" are changed, "Audyssey", "Audyssey Byp. LJR"
and" Audyssey Flat" cannot be selected and measurements have to
be taken again to include the newly-added speakers.
• When using headphones, "Room EO" is always set to "OFF".
[Selectable items]
!£"J:t<t"":
I
[Selectable items]
oti~1
~~,'
(RESTORER 64)
liedil
(RESTORER 96)
,
~'bt
M.ii
(RESTORER HO)
.I~;;w.:~
.,
• "Dynamic EO" is displayed when selecting "Audyssey", "Audyssey
Flat" or "Audyssey Byp.LJR" in the "Room EO" setup. When set to
"ON", the "I~I" indicator is lit.
• When the audio setup measuring results have changed,
"~.;!;"
lights.
Subwoofer
: Optimize frequency response of all speakers.
4~~"WI:!lJ
:
Optimize frequency response of speakers
except front Land R speakers.
;,,:;
~
.. '
.~
: Optimize frequency response of all speakers to
li<c. ' .
' 0 .'
flat response.
~
: Apply frequency response set with "Manual
-""'"'~"""""'---
EO" (l2rpage 34).
I:
Turn equalizer off.
=====~
[Selectable items]
Adjust each subwoofer channel tone.
[Selectable items]
~.;,.~
f,·:::>-;-"·V:-.};;-;:::h::
t
[Variable range]
:;iAt.~
II
• This can be set individually for the separate surround mode other
than PURE DIRECT, DIRECT and Home THX Cinema mode.
·When "Dynamic EO" is set to "ON", you cannot use the "Tone"
setting (l2rpage 90).
~
Operating from the main unit or main remote
control unit
Press the
ROOM EO
button on the main unit or the
EO
button on the
main remote control.
r
OFF - Audyssey - Audyssey Byp. LJR
-.-J
L-
Manual. Audyssey Flat •
When "Audyssey" is selected, "I~s:i-YI" lights.
When "Audyssey Byp. LJR" or "Audyssey Flat" is selected, or when
the auto setup measuring results have changed, "~Y" lights.
---:
•
The default setting for "NET/USB" and "iPod" is "Mode3". All others
are set to "OFF".
53
Middle ~
-
r
OFF - Low
High
Operating from the main unit or main remote
control unit
During playback, press the
RESTORER
button on the main unit or the
RSTR
button on the main remote control unit.
When set to something other than "OFF",
"1lIiiIlmI"
is displayed.
L _ _
O
_
F
_
F
_ - _ _ Mode 1 - Mode 2
(RESTORER 64) (RESTORER 96)
Mode 3
(RESTORER HO)
• Such compressed audio formats as MP3, WMA (Windows Media
Audio) and MPEG-4 AAC reduce the amount of data by eliminating
signal components that are hard for the human ear to hear. The
RESTORER function generates the signals eliminated upon
compression, restoring the sound to conditions near those of the
original sound before compression. It also corrects the sense of
volume of the bass to obtain richer sound with compressed audio
signals.
• This is displayed on the GUI menu and can be set when the input
source is set to "XM'; "HD Radio" or "NET/USB'; or when analog
signals (including AM/FM signals) or PCM signals (fs = 44.1/48
kHz) are input.
iifJ
Operating from the main unit or main remote
control unit
Press the
NIGHT
button on the main unit or the
NGT
button on the
main remote control unit.
The
"lID"
indicator lights when "Low", "Middle" or "High" is
selected.
[Selectable items]
WS"J:t<t"":
I
~
Operating from the main unit
Press the
DYNAMIC EO
button.
• "Audyssey", "Audyssey Byp. LJR" and "Audyssey Flat" can be
selected after the auto setup procedure has been performed.
• If the settings of the speakers for which" None" has been determined
at "Auto Setup" are changed, "Audyssey", "Audyssey Byp. LJR"
and" Audyssey Flat" cannot be selected and measurements have to
be taken again to include the newly-added speakers.
• When using headphones, "Room EO" is always set to "OFF".
[Selectable items]
oti~1
~~,'
(RESTORER 64)
liedil
(RESTORER 96)
,
~'bt
M.ii
(RESTORER HO)
.I~;;w.:~
.,
• "Dynamic EO" is displayed when selecting "Audyssey", "Audyssey
Flat" or "Audyssey Byp.LJR" in the "Room EO" setup. When set to
"ON", the "I~I" indicator is lit.
• When the audio setup measuring results have changed,
"~.;!;"
lights.
[Selectable items]
: Optimize frequency response of all speakers.
t~
:
Optimize frequency response of speakers
~.
except front Land R speakers.
.~
: Optimize frequency response of all speakers to
,.... ~~~"""'...
flat response.
~
: Apply frequency response set with "Manual
-""'"'~""'""'---
EO" (l:rpage 34).
I:
Turn equalizer off.
=====~
II
• This can be set individually for the separate surround mode other
than PURE DIRECT, DIRECT and Home THX Cinema mode.
·When "Dynamic EO" is set to "ON", you cannot use the "Tone"
setting (l:rpage 90).
Adjust each subwoofer channel tone.
[Selectable items]
~.;,.~
f,·:::>-;-"·V:-.};;-;:::h::
t
[Variable range]
:;iAt.~
Subwoofer
~
Operating from the main unit or main remote
control unit
Press the
ROOM EO
button on the main unit or the
EO
button on the
main remote control.
r
OFF - Audyssey - Audyssey Byp. LJR
-.-J
L-
Manual. Audyssey Flat •
When "Audyssey" is selected, "I~s:i-YI" lights.
When "Audyssey Byp. LJR" or "Audyssey Flat" is selected, or when
the auto setup measuring results have changed, "~Y" lights.
---:
•
The default setting for "NET/USB" and "iPod" is "Mode3". All others
are set to "OFF".
53