Dsp Simulation Playback; Stereo Playback - Denon AVP-A1HDCI Owner's Manual

Stereo Playback
• Press the
DSP SIMULATION
button on the main unit or
SIMU
button
on the main remote control unit to switch the surround mode. The
mode switches each time the button is pressed.
• Depending on the program source being played, it may not be
possible to achieve a satisfactory surround effect. In this case, try
other modes to achieve a sound field suited to your tastes.
~.
This is the mode for playing in stereo. The tone can be adjusted.
Sound is output from the front leh and right speakers and subwoofer.
[Selectable items]
When the main unit's
D1RECT/STEREO
button or the main remote
control unit's
D/ST
button is pressed, DIRECT mode can be switched
to STEREO mode.
Tria
desired r,-,oOe accordl,·,'d ti) the program ~vur(.e and v,e\,v:r,g
situation cal" be selected trom anlong 9 DEi'JOr,1 on9",ai
SUI
round
modes
The surrouncl paral'neters can [Je adjusted i&page 89, 901 to
achieve an e....en mor", reaiistic, povv",rfui sound field.
DSP Simulation Playback
When RECOUT mode is set to "SOURCE", with this amplifier
signals encoded in the Dolby Headphone mode can be output from
the recording output terminals and recorded on another recorder
(Gf'page 70).
[Selectable items]
.~
R···'
•
[Selectable items]
imum!!~~W
*
1 • This mode is for enjoying stereo sound from
all speakers.
~}!!.~!d!§s!~~ •
This mode is for enjoying the atmosphere of
viewing a movie on a large screen.
~~I.
This mode is suited for viewing sports
programs.
pt4ftiilliiill.
This mode is for enjoying the atmosphere of a
." .....", . . . . "'" =. live concert in an arena.
.~
__
~i~.
This mode is for enjoying the atmosphere of a
live concert in a jazz club.
e-·-
.~;
... - . - - . . . . . .-. .
,_.;,~
~C; .).
This mode is for appreciating classical concert
programs.
~J!QIJ!;J;1-'
*
2. This mode is for playing monaural movie
sources with surround sound.
tir;;,Ijp,,;Y*I.
This mode is suited for achieving surround
sound with video games.
l:.lIif.~~.
This mode lets you add a sense of expansion
to stereo music sources.
*
1. Can also be set by pressing the
7CH STEREO
button on the main
unit. However, the GUI menu is not displayed.
*
2. When playing sources recorded in monaural in the MONO mode,
the sound will be off balance with a single channel (left or right),
so input to both channels.
.Multi...cbannea.
•
YDig~ttj)T$~ .tt~~
[Selectable items]
&ir~·
This mode is for decoding the input signals according to their format
and playing surround sound.
The display when the STANDARD mode is selected depends on the
input signal and surround back output playback mode.
*
1. This is displayed when the input signal is "DTS-ES Matrix 6.1"
and the AVP-A 1HDCl's "AFDM" setting is set to "ON".
*
2. This is displayed when the input signal is "DTS-ES Discrete 6.1".
*
3. This is displayed when the input signal is "DTS 96/24".
For details, see page 91, 92.
. $ia...
,ei1r>
1 :
;'
.
DOLBY DIGITAL
DOLBY DIGITAL
(other than 2chl / DOLBY DIGITAL EX
Dolby
DOLBY DIGITAL DOLBY DIGITAL+PLDx CINEMA
Digital EX DOLBY DIGITAL+PLlIx MUSIC
Source DOLBY DIGITAL
Plus
DOLBY DIGITAL
+
DOLBYTrueHD DOLBYTrueHD
DTS (5.1 chI /
DTS SURROUND
DTS+PLlIx CINEMA
DTS·ES Discrete
DTS+PLlIx MUSIC
6.1/
DTS+NEO.6
DTS
DTS-ES Matrix
DTS ES MTRX6.1
(*
1)
Surround
6.1/
DTS ES DSCRT6.1
(*
2)
Source
DTS 96/24
DTS 96/24
(* 3)
DTS-HD High
DTS-HD HI RES
Resolution Audio
DTS-HD Master
DTS-HD MSTR
Audio
DVD·
MULTI CH IN
Audio,
PCM (multi chI /
MULTI IN+PLlIx CINEMA
SACD
DSD (multi chI MULTI IN+PLDx MUSIC
MULTI CH IN 71
•
49
Stereo Playback
• Press the
DSP SIMULATION
button on the main unit or
SIMU
button
on the main remote control unit to switch the surround mode. The
mode switches each time the button is pressed.
• Depending on the program source being played, it may not be
possible to achieve a satisfactory surround effect. In this case, try
other modes to achieve a sound field suited to your tastes.
~.
This is the mode for playing in stereo. The tone can be adjusted.
Sound is output from the front leh and right speakers and subwoofer.
[Selectable items]
When the main unit's
D1RECT/STEREO
button or the main remote
control unit's
D/ST
button is pressed, DIRECT mode can be switched
to STEREO mode.
Tria
desired r,-,oOe accordl,·,'d ti) the program ~vur(.e and v,e\,v:r,g
situation cal" be selected trom anlong 9 DEi'JOr,1 on9",ai
SUI
round
modes
The surrouncl paral'neters can [Je adjusted i&page 89, 901 to
achieve an e....en mor", reaiistic, povv",rfui sound field.
DSP Simulation Playback
When RECOUT mode is set to "SOURCE", with this amplifier
signals encoded in the Dolby Headphone mode can be output from
the recording output terminals and recorded on another recorder
(Gf'page 70).
[Selectable items]
.~
R···'
•
[Selectable items]
imum!!~~W
*
1 • This mode is for enjoying stereo sound from
all speakers.
~}!!.~!d!§s!~~ •
This mode is for enjoying the atmosphere of
viewing a movie on a large screen.
~~I.
This mode is suited for viewing sports
programs.
pt4ftiilliiill.
This mode is for enjoying the atmosphere of a
." .....", . . . . "'" =. live concert in an arena.
.~
__
~i~.
This mode is for enjoying the atmosphere of a
live concert in a jazz club.
e-·-
.~;
... - . - - . . . . . .-. .
,_.;,~
~C; .).
This mode is for appreciating classical concert
programs.
~J!QIJ!;J;1-'
*
2. This mode is for playing monaural movie
sources with surround sound.
tir;;,Ijp,,;Y*I.
This mode is suited for achieving surround
sound with video games.
l:.lIif.~~.
This mode lets you add a sense of expansion
to stereo music sources.
*
1. Can also be set by pressing the
7CH STEREO
button on the main
unit. However, the GUI menu is not displayed.
*
2. When playing sources recorded in monaural in the MONO mode,
the sound will be off balance with a single channel (left or right),
so input to both channels.
.Multi...cbannea.
.
YDig~ttj)T$~ .tt~~
[Selectable items]
&ir~·
This mode is for decoding the input signals according to their format
and playing surround sound.
The display when the STANDARD mode is selected depends on the
input signal and surround back output playback mode.
*
1. This is displayed when the input signal is "DTS-ES Matrix 6.1"
and the AVP-A 1HDCl's "AFDM" setting is set to "ON".
*
2. This is displayed when the input signal is "DTS-ES Discrete 6.1".
*
3. This is displayed when the input signal is "DTS 96/24".
For details, see page 91, 92.
. $ia...
,ei1r>
1 :
;'
.
DOLBY DIGITAL
DOLBY DIGITAL
(other than 2chl / DOLBY DIGITAL EX
Dolby
DOLBY DIGITAL DOLBY DIGITAL+PLDx CINEMA
Digital EX DOLBY DIGITAL+PLlIx MUSIC
Source DOLBY DIGITAL
Plus
DOLBY DIGITAL
+
DOLBYTrueHD DOLBYTrueHD
DTS (5.1 chI /
DTS SURROUND
DTS+PLlIx CINEMA
DTS·ES Discrete
DTS+PLlIx MUSIC
6.1/
DTS+NEO.6
DTS
DTS-ES Matrix
DTS ES MTRX6.1
(*
1)
Surround
6.1/
DTS ES DSCRT6.1
(*
2)
Source
DTS 96/24
DTS 96/24
(* 3)
DTS-HD High
DTS-HD HI RES
Resolution Audio
DTS-HD Master
DTS-HD MSTR
Audio
DVD·
MULTI CH IN
Audio,
PCM (multi chI /
MULTI IN+PLlIx CINEMA
SACD
DSD (multi chI MULTI IN+PLDx MUSIC
MULTI CH IN 71
•
49