Table of Contents
Advertisement
#H7. 14 PIN MOLEX CONNECTOR:
1
2
3
X
8
9
10
WIRING
Keep wiring away from moving engine parts, exhaust pipes and
high-tension cable. Be sure to tape wires that pass through holes on the
firewall to prevent fraying.
CAUTION: Do not connect the wire harness to the control module until
all wiring to vehicle is complete.
H1: 6 PIN HEAVY GAUGE WIRING CONNECTIONS:
Remember that what the system does to start a vehicle is to duplicate the
functions of the ignition key switch! Below, we will explain the three basic
functions of the ignition switch. Since this installation will require analysis
of the ignition switch functions, we recommend making the three
connections below at the ignition switch harness directly.
Violet Wire—Starter Output
Careful consideration for the connection of this wire must be made to
prevent the vehicle from starting while in gear. Understanding the
difference between a mechanical and an electrical Neutral Start Switch
will allow you to properly identify the circuit and select the correct
installation method. In addition you will realize why the connection of the
safety wire is required for all mechanical switch configurations.
4
5
6
11
12
13
White / Violet Wire: (+) Brake Switch Shut Down Input
7
14
White Wire: (-) 200mA Dome Light Control Output
White / Black Wire: (-) Negative Hood Pin Safety Shut Down
6
Hide quick links:
Advertisement
Table of Contents
