HP Notebook PC User Manual page 122

Select
AMT Options (select models only).
Set Security Level
Restore Security Defaults
110 Chapter 13 Computer Setup
To do this
NOTE: All AMT options are disabled by default.
●
Enable/disable firmware verbosity.
●
Enable/disable AMT setup prompt (Ctrl-P).
●
Enable/disable USB key provisioning support.
●
Enable/disable unconfigure AMT on next boot.
● Select terminal emulation mode. Options include the
following:
◦ ANSI (default setting)
◦ VT100
● Enable/disable firmware progress event support.
● Enable/disable initiate Intel CIRA.
Change, view, or hide security levels for all BIOS menu items.
Restore the default security settings.