Using The Windows Recovery Tools; Using F11 - HP Notebook PC User Manual

Using the Windows recovery tools

To recover information you previously backed up, follow these steps:
1. Select Start > All Programs > Maintenance > Backup and Restore.
2. Follow the on-screen instructions to recover your system settings, your computer (select models
only), or your files.
NOTE: Windows includes the User Account Control feature to improve the security of your computer.
You may be prompted for your permission or password for tasks such as installing software, running
utilities, or changing Windows settings. Refer to Windows Help and Support for more information.
To recover your information using Startup Repair, follow these steps:
CAUTION:
All files you have created and any software installed on the computer are permanently removed. When
reformatting is complete, the recovery process restores the operating system, as well as the drivers,
software, and utilities from the backup used for recovery.
1. If possible, back up all personal files.
2. If possible, check for the presence of the Windows partition and the HP Recovery partition.
To check for the Windows partition, select Start > Computer.
To check for the HP Recovery partition, select Start, right-click Computer, click Manage, and then
click Disk Management.
NOTE:
your operating system and programs using the Windows 7 operating system DVD and the Driver
Recovery disc (both purchased separately). For additional information, refer to the "Using a
Windows 7 operating system DVD (purchased separately)" section in this guide.
3. If the Windows partition and the HP Recovery partition are listed, restart the computer, and then
press f8
4. Select Startup Repair.
5. Follow the on-screen instructions.
NOTE: For additional information on recovering information using the Windows tools, perform a search
for these topics in Help and Support.

Using f11

CAUTION:
have created and any software installed on the computer are permanently removed. The
tool reinstalls the operating system and HP programs and drivers that were installed at the factory.
Software not installed at the factory must be reinstalled.
To recover the original hard drive image using f11, follow these steps:
1. If possible, back up all personal files.
2. If possible, check for the presence of the HP Recovery partition: select Start, right-click
Computer, click Manage, and then click Disk Management.
NOTE:
programs using the Windows 7 operating system DVD and the Driver Recovery disc (both
purchased separately). For additional information, refer to the "Using a Windows 7 operating
system DVD (purchased separately)" section in this guide.
Using Startup Repair completely erases hard drive contents and reformats the hard drive.
If the Windows partition and the HP Recovery partition are not listed, you must recover
before the Windows operating system loads.
Using f11 completely erases hard drive contents and reformats the hard drive. All files you
If the HP Recovery partition is not listed, you must recover your operating system and
f11 recovery
Performing a recovery 101