Camera Reboot - Digital Watchdog MEGApix DWC-MV421D User Manual

CAMERA REBOOT*

R e s e t t i n g t h e C a m e r a
Pressing the reset button on the camera's control board for five (5) seconds will initialize all environmental variables to
factory default. Previous setup for IP default, time, etc. will be deleted. If a system's IP address is lost, reset the camera
back to factory default.
The following are the default network settings.
IP Mode
IP Address
Subnet Mask
Gateway
Base Port
HTTP Port
*Frequent use may cause system error.
DHCP
192.168.1.123
255.255.255.0
192.168.1.123
7000
80
23