Digital Watchdog MEGApix DWC-MV421D User Manual page 12

INSTALLATION*
1
Use the camera's mounting template or
1.
your camera to mark the holes as
required.
3. Pull wires through and make
connections. Use the Cable Base to
easily place all UNUSED cables.
12
2.
3 4
4. Connect the RJ45 to a CAT5 cable or a
power adaptor. Refer to "Network
Connection" for further explanation. If
necessary, connect the Audio In and Out,
and Relay Control cables.
2
Drill holes into the drywall and insert the
drywall mounts into the holes.