E-Pay Device Type2 (Data Tran) - Sharp UP-3500 Instruction Manual

I I I I I E-pay device type2 (DATA TRAN)
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [9 SYSTEM] button to display the menu, and touch the [3 EPAY DEVICE PRESET] button to
display the detail menu. Then touch the [2 TYPE#2] button to program.
(3) Touch the required program item, and enter each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
TERMINAL#
CHANNEL#
TIME OUT1
TIME OUT2
TIME OUT3
TEL NO.
TEL ID
TEL MODE
FTS MODE
AMOUNT%
➝
(9 SYSTEM
Parameter
[0]
This means local device. (RS connection)
[1 – 254]
This means re-routed device.
0 – 5
"0" means no RS-232 channel is assigned.
3 digits (1 to 255 (sec): 10)
3 digits (1 to 255 (sec): 99)
4 digits (1 to 3000 (sec): 99)
1-25 character (0 to 9, W, comma)
8 digits (00000000 to 99999999)
PULSE/TONE
ENABLE/DISABLE
0.00% -100.00%
3 EPAY DEVICE PRESET
Device assign
(terminal#)
Device assign
(channel#)
Time out timer for ACK/NAK
Time out timer for response of
authorization
Time out timer for batch close
Phone number for dial out
Password for dial out
Dial mode for dial out
FTS mode
Authorization rate to allow CH tip
➝
2 TYPE#2 .......... PGM2)
Classification
www.cashregisters.net
189