Ocb Preset; Cctv Preset - Sharp UP-3500 Instruction Manual

I I I I I OCB preset
(9 SYSTEM
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [9 SYSTEM] button to display the menu, and touch the [5 OCB PRESET] button to program.
(3) Touch the required program item, and enter each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
TERMINAL#
SEND PRINT DATA
I I I I I CCTV preset
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [9 SYSTEM] button to display the menu, and touch the [6 CCTV PRESET] button to
program.
(3) Touch the required program item, and enter each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
TERMINAL#
SEND PRINT DATA
➝
5 OCB PRESET .......... PGM2)
Parameter
[0] : not connect
[1 – 254] : TCP/IP (4th octet of IP address)
DISABLE/ENABLE
➝
(9 SYSTEM 6 CCTV PRESET .......... PGM2)
Parameter
[0] : not connect
[1 – 254] : TCP/IP (4th octet of IP address)
DISABLE/ENABLE
Classification
Device assign
(terminal#)
Send print data
Classification
Device assign
(terminal#)
Send print data
www.cashregisters.net
193