E-Pay Device Type1 (Omni) - Sharp UP-3500 Instruction Manual

I I I I I E-pay device type1 (OMNI)
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [9 SYSTEM] button to display the menu, and touch the [3 EPAY DEVICE PRESET] button to
display the detail menu. Then touch the [1 TYPE#1] button to program.
(3) Touch the required program item, and enter each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
TERMINAL#
CHANNEL#
TIME OUT1
TIME OUT2
BAUD RATE
188
➝
(9 SYSTEM
Parameter
[0] (Channel# is not "φ".)
This means local device. (RS connection)
[1 – 2] (Channel# is "φ".)
This means MWS connection.
0 – 5
"0" means no RS-232 channel is assigned.
3 digits (1 to 255 (sec): 10)
3 digits (1 to 255 (sec): 99)
Transmission data rate (baud rate)
19200 bps
9600 bps
4800 bps
2400 bps
1200 bps
300 bps
3 EPAY DEVICE PRESET
Device assign
(terminal#)
Device assign
(channel#)
Time out timer for ACK/NAK
Time out timer for response of
authorization
Baud rate
➝
1 TYPE#1 .......... PGM2)
Classification
www.cashregisters.net