E-Pay Device Ic Card; E-Pay Device Account Balance I/F - Sharp UP-3500 Instruction Manual

I I I I I E-pay device IC card
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [9 SYSTEM] button to display the menu, and touch the [3 EPAY DEVICE PRESET] button to
display the detail menu. Then touch the [5 IC CARD] button to program.
(3) Touch the required program item, and enter each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
CHANNEL#
TIME OUT1
I I I I I E-pay device account balance I/F
(9 SYSTEM
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [9 SYSTEM] button to display the menu, and touch the [3 EPAY DEVICE PRESET] button to
display the detail menu. Then touch the [6 ACCOUNT BALANCE I/F] button to program.
(3) Touch the required program item, and enter each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
TERMINAL#
CHANNEL#
TIME OUT1
TIME OUT2
BAUD RATE
➝
(9 SYSTEM 3 EPAY DEVICE PRESET
Parameter
0 – 5
"0" means no RS-232 channel is assigned.
3 digits (1 to 255 (sec): 60)
➝
3 EPAY DEVICE PRESET
Parameter
[0] (Self terminal no.)
This means local device.
[1 – 2]
This means MWS connection.
[3 – 254] (Except self terminal no.)
This means re-routed device.
0 – 5
"0" means no RS-232 channel is assigned.
3 digits (1 to 255 (sec): 10)
3 digits (1 to 255 (sec): 99)
Transmission data rate (baud rate)
19200 bps
9600 bps
4800 bps
2400 bps
1200 bps
300 bps
➝
5 IC CARD .......... PGM2)
Classification
Device assign
(channel#)
Time out timer
➝
6 ACCOUNT BALANCE I/F .......... PGM2)
Classification
Device assign
(terminal#)
Device assign
(channel#)
Time out timer 1
Time out timer 2
Baud rate
www.cashregisters.net
191