Part Names And Functions; External View; Front View; Rear View - Sharp UP-3500 Instruction Manual

1

Part Names and Functions

This chapter describes the part names and functions of this POS terminal.

External View

I I I I I Front view
I I I I I Rear view
AC adapter

AC power cord

Plug the AC adapter connector into the AC adapter jack, then plug the AC power cord into the wall outlet
that has a dedicated earth ground.

Mode switch

The switch has the position ON ( I ) and STANDBY ( ).
Set the mode switch to the ON ( I ) position after the terminal has been plugged into the wall outlet.
The STANDBY ( ) position locks all operations of the POS terminal. When you select this position, the
screen will disappear.

Power indicator

When the POS terminal is plugged in, the power indicator at the lower right corner of the LCD panel will
light up. The power indicator will remain on while the display's backlight is off.
Side cover
AC power cord
Magnetic card reader
Operator display (touch panel)
Power indicator
AC adapter jack
Mode switch
(located at the bottom cabinet)
www.cashregisters.net
7