Remove the hard drive backplane.
5.
To replace the component, reverse the removal procedure.
Hard drive backplane retainer
To remove the component:
Power down the server (on page 30).
1.
Extend or remove the server from the rack
2.
Remove the access panel
3.
Remove all hot-plug hard drives
4.
Remove the hard drive backplane
5.
Remove the hard drive backplane retainer.
6.
To replace the component, reverse the removal procedure.
("Remove the server from the
("Access
panel" on page 32).
("Hot-plug SAS hard
("Hard drive
backplane" on page 60).
rack" on page 31).
drive" on page 33).
Removal and replacement procedures 61