Media Drive Ejector Assembly - HP ProLiant DL380 Maintenance And Service Manual

Remove the processor fan bracket plate.
8.
To replace the component, reverse the removal procedure.

Media drive ejector assembly

To remove the component:
Power down the server (on page 30).
1.
Extend or remove the server from the rack
2.
Remove the access panel
3.
Remove the media drive
4.
Remove the processor fan bracket
5.
Remove the fan board
6.
Remove the processor fan bracket plate
7.
("Remove the server from the
("Access panel" on page 32).
("Media drive or blank" on page 37).
("Processor fan
("Fan board" on page 42).
("Processor fan bracket
rack" on page 31).
bracket" on page 39).
plate" on page 43).
Removal and replacement procedures 44