Power supply backplane
To remove the component:
Power down the server (on page 30).
1.
Remove all power supplies
2.
Extend or remove the server from the rack
3.
Remove the access panel
4.
Remove the power supply backplane.
5.
To replace the component, reverse the removal procedure.
Hard drive backplane
To remove the component:
Power down the server (on page 30).
1.
Extend or remove the server from the rack
2.
Remove the access panel
3.
Remove all hot-plug hard drives
4.
("Hot-plug power
supply" on page 34).
("Remove the server from the
("Access
panel" on page 32).
("Remove the server from the
("Access
panel" on page 32).
("Hot-plug SAS hard
rack" on page 31).
rack" on page 31).
drive" on page 33).
Removal and replacement procedures 60