Systems Insight Display; Fan Board - HP ProLiant DL380 Maintenance And Service Manual

Systems Insight Display

To remove the component:
Power down the server (on page 30).
1.
Extend the server from the rack (on page 29).
2.
Remove the access panel
3.
IMPORTANT:
processor fan bracket. When reinstalling the processor fan bracket, press the top of each fan
to be sure it seats securely.
Remove the processor fan bracket
4.
Disconnect the Systems Insight Display cable.
5.
Remove the Systems Insight Display.
6.
To replace the component, reverse the removal procedure.

Fan board

To remove the component:
Power down the server (on page 30).
1.
Extend the server from the rack (on page 29).
2.
Remove the access panel
3.
IMPORTANT:
processor fan bracket. When reinstalling the processor fan bracket, press the top of each fan
to be sure it seats securely.
Remove the processor fan bracket
4.
Disconnect the Systems Insight Display cable and the fan board cable.
5.
("Access panel" on page 32).
For this procedure, you do not need to remove the hot-plug fans from the
("Processor fan
("Access panel" on page 32).
For this procedure, you do not need to remove the hot-plug fans from the
("Processor fan
bracket" on page 39).
bracket" on page 39).
Removal and replacement procedures 42