Change The Monitor Volume; Inbound Listen; Outbound Talk; Vehicle Present - 3M G5 Operating Instructions Manual

Configuration

Change the Monitor Volume

Inbound Listen

Outbound Talk

Vehicle Present

November 6 2014 – Revision 2.1
Page 16 of 77
The monitor is an additional speaker that can be used to monitor drive thru
communication without a headset, typically in the kitchen. If the monitor has a
volume control built into it, you can use it to control the overall volume level of
the speaker. To be more specific about which elements you want to control,
follow the instructions in the following sections.
Changing the inbound listen volume affects how loudly the monitor plays the
inbound (customer order point) communication. You can also disable the
monitor playing inbound sounds.
To change the inbound listen monitoring settings:
•
Enter the configuration mode, see page 11.
•
Select
02 Monitor Volume
•
To enable or disable the monitor playing the inbound sounds, change
the value for
Inbound Listen: Enable
•
To change the volume level, select a new value for
. The range is 0 (silent) to 20 (maximum).
Volume
Changing the outbound talk volume affects how loudly the monitor plays the
outbound (order taker) communication. You can also disable the monitor
playing outbound talk.
Note:
To avoid feedback and echo, set the outbound talk volume as low as possible.
To change the outbound talk monitoring settings:
•
Enter the configuration mode, see page 11.
•
Select
02 Monitor Volume
•
To enable or disable the monitor playing the outbound talk, change the
value for
Outbound Talk: Enable
•
To change the volume level, select a new value for
. The range is 0 (silent) to 20 (maximum).
Volume
Changing the vehicle present volume affects how loudly the monitor plays the
vehicle present tone. You can also disable the monitor playing the vehicle
present tone.
To change the vehicle present monitoring settings:
•
Enter the configuration mode, see page 11.
•
Select
02 Monitor Volume
•
To enable or disable the monitor playing the vehicle present tone,
change the value for
•
To change the volume level, select a new value for
Present: Volume
.
to
.
to or
ON
.
Vehicle Present: Enable
. The range is 0 (silent) to 20 (maximum).
3M™ Drive-Thru Systems Model G5 and Model XT-1
or .
ON OFF
Inbound Listen:
.
OFF
Outbound Talk:
to or .
ON OFF
Vehicle
Operating Instructions