Message Names; Dual Lane Systems - Lane 2 - 3M G5 Operating Instructions Manual

Appendix: Greeter Module

Message Names

November 6 2014 – Revision 2.1
Page 70 of 77
1. Enter the greeter configuration menu.
2. Select
7 Alert Message External Trigger Inputs
:ALERT MESSAGE EXTERNAL TRIGGER INPUTS:
'SPLIT/CROSS'Input Pin=>Original Mode<
'ORDER TAKING'Input Pin=>Original Mode<
'DAY/NIGHT'Input Pin=>Original Mode<
:ALERT MESSAGE EXTERNAL TRIGGER INPUTS:
'EXT_MSG' Input Pin=>Original Mode<
NOTE: In Original Mode, This Input Will
Ignore ALL Daypart Settings.
3. Change the value of each input setting. Your choices are:
•
Original Mode
determines if the EXT_MSG input plays a message.
•
<msg name>
corresponding message will play when the selected external
input is activated. Message choices include all messages of Type
ALERT.
Perform the following procedure to customize the message names. The names
can also be edited from the "Record Message" menu:
1. Enter the greeter configuration menu.
2. Select
8 Message Names
:MESSAGE NAMES:
001:>Breakfast 1 <
003:<Breakfast 2 >
005:<Lunch 1
:MESSAGE NAMES:
007:>Lunch 2
009:<Evening 1
011:<Reminder 1
:MESSAGE NAMES:
013:>Reminder 3
015:<Cooler Open >
3. Using the ,
keypad to enter each character. Advance to the next character in the
name using the
Dual Lane Systems – Lane 2
In a dual lane system, the headsets are programmed to the Lane 1 base station,
so settings pertaining to headsets are absent from the Lane 2 base station.
The following menu choices are available.
- The Greeter Message Properties setting
- Selecting a message name means the
.
002:<------------>
▐
004:<------------>
▐
> 006:<------------>
▐
< ▐ 008:<------------>
> 010:<------------>
▐
> 012:<Reminder 2
▐
< 014:<Reminder 4
▐
016:<Door Open
▐
, ⊳,
and keys, select a message name use the
Enter
key.
3M™ Drive-Thru Systems Model G5 and Model XT-1
.
>
>
>
Operating Instructions