18. After firmware update completes, the receiver will return to normal operation mode.
19. Firmware update could take up to 10 minutes.
The procedure for loading new firmware into the HiPer VR can be performed using
MAGNET Field software version 5.1 and higher.
Option Authorization Files
Topcon issues an Option Authorization File (OAF) to enable the specific options that you purchased.
Topcon's OAF system allows you to customize and configure the receiver according to your particular
requirements.
The HiPer VR receiver is typically shipped with an OAF based on the initial purchase of the receiver
kit configuration. There are several upgrade options available with the receiver that can extend the
receiver's functionality to better suit your job requirements. Examples of upgrade options are listed
below:
•
GPS L1, L2, L5 signal tracking
GLONASS L1, L2, L3 signal tracking
•
BeiDou B1, B2 signal tracking
•
•
QZSS L1, L2, L5 signal tracking
•
SBAS L1, L5 signal tracking
•
Galileo E1, E5 signal tracking
•
RTK and update rate 20 Hz (10 Hz standard)
•
Precise Point Positioning (PPP) Mode
Contact your Topcon dealer or a customer representative for a complete listing of available options
and pricing information.
Checking the Receiver's OAF
1. Connect the receiver to a computer and open TRU.
2. Start TRU on your computer.
3. Click Device > Application Mode > Receiver Managing.
4. Click Device > Connect. The Connection Parameters screen appears. Click the Connect
button to establish a connection with the receiver.
Option Authorization Files
P/N: 1023998-01
5-5