Reboot Sequences; Suspend / Resume; Warmboot; Cold Boot / Restart - Honeywell MX8 User Manual

Reboot Sequences

When the Windows Mobile Today panel is displayed or an application begins, the power up sequence is complete. If you have
previously saved your settings, they will be restored on reboot. Application panel changes are saved when ok is tapped on an
application properties panel.
During the processes that follow there may be small delays while the wireless client connects to the network and Bluetooth
relationships establish or re-establish.

Suspend / Resume

Quickly tapping the Power key places the MX8 in Suspend mode. Quickly tapping the Power key again, pressing any key,
pressing the trigger (on the trigger handle), or tapping the touchscreen, returns the MX8 from Suspend. The System LED blinks
green when the video display is Off.
or
Hold down the Power key and then the Enter key until the screen blanks. Release the keys and the MX8 resumes.

Warmboot

Select Start > Settings > System > Registry and click Warmboot. The unit reboots and all programs are re-launched. When the
Today panel is displayed or an application begins, the warm boot sequence is complete.

Cold Boot / Restart

Temporary data not saved is lost. All programs are re-launched, programs installed from CAB files are reinstalled. Previously
saved user settings are restored. Restart may also be called cold boot. Hold down the Blue key, the Scan key and the Power
key until the screen blanks. Release the keys and the MX8 cold boots.
Be sure to press the Scan key not the Enter key. Pressing the Enter key begins a suspend/resume function instead of a cold
boot function.
2-17