Charge Or Recharge The Main Battery - Honeywell MX8 User Manual

Charge or Recharge the Main Battery

Warning : Only use Honeywell MX8A380BATT / 161376-0001 batteries as replacements.
Note: The MX8 Battery Charger is designed for an indoor, protected environment.
New batteries must be fully charged prior to use.
The main battery can be recharged in an AC powered Battery Charger after the battery has been removed from the MX8 or its
packing material when new.
The main battery while in the MX8 can be recharged using several different methods.
Note: An external power source is required before the main battery in the MX8 will recharge.
The main battery can be recharged while it is in the MX8:
by connecting the MX8 AC power adapter to the I/O connector at the base of the MX8.
l
by docking the MX8 in a powered desk cradle
l
or by connecting the car power adapter (CLA) to the I/O connector at the base of the MX8.
l
Note: An uninterrupted external power source (wall AC adapters) transfers power to the computer's internal
charging circuitry which, in turn, recharges the main battery and internal battery. Frequent connection
to an external power source, if feasible, is recommended to maintain internal battery charge status as
the internal battery cannot be recharged by a dead or missing main battery.
2-4