Lights And Visibility - Seat Alhambra Owner's Manual

Lights and visibility

Lights
Switching lights on and off
Switching on the daylight driving light (only available in some
countries)
– To switch on the daylight driving lights, leave the light switch in
position O when you turn on the ignition.
Switching on the side lights
– Turn the light switch
Switching on dipped headlights
– Turn the light switch to position
Safety First

Fig. 70 Detailed view of
dash panel lights, fog
light and rear fog light
control
⇒ fig. 70 ⇒

to position .

.
Operating instructions
Switching off the lights
– Turn the light switch to position O.
Switching on the front fog lights
– Pull the switch out of position

symbol in the light switch lights up.
Switching on the rear fog lights (vehicles with no front fog lights)
– Pull the switch out of position
lights up in the instrument panel
Switching on the rear fog lights (vehicles with front fog lights)
– Pull the switch out of position
warning lamp lights up in the control panel
The dipped beam headlights will only work with the ignition on. The head-
lights are automatically switched to the side light setting while the engine is
being started and after the ignition has been switched off.
18)
The daylight driving light automatically comes on when the ignition is
switched on. It is not necessary to turn on the light switch. The daylight
driving lights are switched on as long as the ignition is switched on.
Rear fog light
The rear fog light is so bright that it may dazzles drivers behind. You should
use the rear fog light only when visibility is very poor.
17)
Optional equipment
18)
for selected markets only
Tips and Maintenance
Lights and visibility
17)
 
or to the first stop. The

to the last stop. A warning lamp

.
 
or to the second stop. A

.
Technical Data
109