248
If and when
– Remove the glass.
– Remove the failed glass bulb and replace with a new bulb.
– Bolt down the glass without overtightening, ensuring that the
seal is perfectly fitted.
– Fit the reflector in the corresponding space in the tailgate
ensuring that the rubber seal and the light are assembled
correctly.
– Do not bolt down the glass too tightly.
Interior light
– Insert a fine screwdriver or similar between the casing and the
⇒ fig. 168
glass (arrow)
Fig. 168 Interior light
and carefully remove the glass.
– Replace the bulb.
– Replace the glass in the casing.