Seat Alhambra Owner's Manual page 57

A
– Pull the loop in the direction of the arrow and push the seat
1
cushion down until it engages.
Fitting the slumber roll
– Remove the head restraint.
– Fit the head restraint onto the slumber roll.
– Reinsert the head restraint and push down until it can be heard
to engage.
Removing the slumber roll
– Remove the head restraint.
– Pull the slumber roll off the head restraint.
– Reinsert the head restraint and push down until it can be heard
to engage.
For safety reasons, we recommend that the child seat for children in Group 1
is installed facing against the direction of travel.
Safety First Operating instructions
Adjusting the belt routing for larger children in Group 1
A correctly adjusted seat belt helps to protect your child!
⇒ fig. 36
– Pull the upper part
fasteners to the front.
– For larger children, guide the two shoulder belts in the side slots
A
to the upper position .
6
A
– Then push the support
A
For smaller children, guide the two belts in the side slots to the lower position
A
.
7
WARNING
⇒ fig. 36 A
The support must be pressed onto the seat in the area of the
A
Velcro fastener in such a way that the belts can move freely in the slots.
Tips and Maintenance
Child safety
Fig. 36 Integrated child
seats. adjusting the belt
routing
A
of the support off the Velcro
A
under the belts and secure it ⇒
Technical Data
55
.