Breakdown Set - Seat Alhambra Owner's Manual

234 If and when

Breakdown set*

Components
Components
The anti-puncture kit contains the following components:
A
Tyre valve remover
1
A
Sticker indicating maximum speed "max. 80 km/h" or "max. 50 mph"
2
A
Filler tube with cap
3
A
Compressor
4
A
Tube for inflating tyres
5
A
Pressure gauge
6
A
Air bleed screw
7
A
ON/OFF switch
8
A
12 volt connector
9
A Bottle of sealant ⇒
10
A
Spare tyre valve
11
Caution
•
Note the expiry date on the bottle of tyre sealant Do not use sealant paste
that has expired. A bottle of tyre sealant can be obtained at any SEAT dealer.
•
Dispose of used or expired sealant observing any legal requirements.
•
Likewise, note any instructions from the anti-puncture kit's manufacturer
(if included).
Note
•
In vehicles fitted with a towing bracket, it is first necessary to remove the
tools in order to reach the anti-puncture kit.
Preparation of anti-puncture kit
Small punctures (up to 4 mm in diameter), particularly ones
Fig. 153 Contents of anti-
puncture kit
in the tread, can be sealed using the anti-puncture set.
If you have a puncture, stop the car well away from moving traffic.
Switch on the hazard warning lights and set the emergency triangle
in position. Please observe legal requirements when doing so.
– Take the compressor and the bottle of sealant from the luggage
compartment.
– Remove the anti/puncture sticker
the instrument panel where it can be seen clearly.
– Leave the foreign body (e. g. screw, nail) in the tyre.
– Take the cap off the tyre valve.
⇒ fig. 153 A
and apply it to
2